Skylord Exp surface mount warning light

Strands Skylord EXP LED Warning Beacon Surface Mount - R65 Class 2 with Wireless Bluetooth Control

Strands Skylord EXP LED Warning Beacon Surface Mount is a modern low-profile LED warning light designed for professional vehicles and machinery where high visibility, rugged construction and a clean installation are essential. With ECE R65 Class 2 approval, eight warning patterns, separate day and night modes and wireless control through SKYN1 EXP, it provides an advanced warning light solution for service vehicles, vans, trucks, construction machinery and other work vehicles.

The compact design measures only approximately 40.4 mm high and is installed using a single M8 bolt. This makes Skylord EXP particularly attractive for installations where a discreet and integrated appearance is preferred over a conventional tall warning beacon. Bluetooth communication with the SKYN1 EXP controller also reduces the need for separate control wiring throughout the vehicle.

E-Approved LED Warning Light According to R65 Class 2

Skylord EXP is E-approved according to ECE R65 Class 2 and developed for professional warning lighting applications. The powerful amber LED light helps make the vehicle clearly visible when working on or near roads, at work sites and in other environments where surrounding traffic or personnel need to be alerted to the vehicle's presence.

R65 Class 2 provides separate light output levels adapted to day and night conditions. This allows a stronger warning signal to be used in daylight and a suitable reduced level in darker conditions.

8 Warning Patterns for Different Applications

The warning beacon provides 8 different warning patterns that can be selected directly from the SKYN1 EXP controller. The patterns are available in both day and night modes, giving a total of 16 combinations of flash pattern and brightness level.

• Single Flash
• Double Flash
• Quadruple Flash
• Constant
• Rotating
• Reverse Rotation
• Chase
• Fast Chase

This makes it possible to adapt the warning light to the vehicle, working environment and preferred visual warning signal.

Cruise Mode and Steady Light

In addition to the different warning patterns, Skylord EXP also features Cruise Mode and a steady-light function. These can easily be activated through the SKYN1 EXP controller and provide additional flexibility for applications where flashing warning lighting is not always required.

The controller also features a memory function that automatically remembers the most recently used mode, so the setting does not need to be selected again each time the system is used.

SKYN1 EXP - Wireless Bluetooth Control

The Strands Skylord EXP warning beacon has been developed for SKYN1 EXP, Strands' wireless system for controlling compatible vehicle lighting. The light features built-in Bluetooth communication and pairs with the SKYN1 EXP controller inside the vehicle.

Once the warning beacon has been paired, the system automatically identifies it as a warning light and assigns it to the correct button on the controller. From there, the warning light can be switched on or off, different warning patterns can be selected and day or night mode can be chosen.

The SKYN1 EXP wireless controller, part number 907851S1, is required to use the warning beacon and is sold separately. The light cannot be activated until it has been paired with the controller.

Control Multiple Warning Lights from the Same System

SKYN1 EXP allows several compatible lights to be combined within the same wireless system. This is particularly useful on larger service vehicles, trucks and work machinery where multiple warning lights need to be installed around the vehicle.

The system automatically identifies different types of EXP lighting and assigns driving lights, position lights, work lights and warning lights to their respective functions on the controller. This allows a more complete lighting system to be managed from one unit.

Easier Installation with Less Control Wiring

A major advantage of the SKYN1 EXP system is simplified installation. The Skylord EXP warning beacon requires a power connection, while control of the light's functions is handled wirelessly via Bluetooth.

This means separate control wires do not need to be routed throughout the vehicle to change warning patterns or functions. On modern vans, service vehicles, trucks and machinery, this can simplify installation and contribute to a cleaner electrical system.

Surface Mount with a Single M8 Bolt

This version of Skylord EXP is designed for permanent surface mounting and is installed using just one M8 bolt. This provides a secure mounting solution while keeping installation simple and discreet.

The mounting solution is particularly practical for roofs, vehicle body panels and other flat surfaces where a permanently installed LED warning beacon is required. Mounting hardware for the Surface Mount version is included.

Only Around 40 mm High - Discreet Low-Profile Design

Skylord EXP stands apart from conventional tall warning beacons thanks to its extremely low-profile construction. The light measures approximately 135.5 mm wide and only around 40.4 mm high.

The low profile creates a more integrated appearance on the vehicle and makes the light particularly suitable where overall installation height needs to be minimised. The dark lens also enhances the discreet appearance when the warning light is switched off.

IP69K - Built for Professional Vehicle Environments

A warning beacon mounted externally on a work vehicle must withstand rain, snow, road salt, dust, dirt and significant temperature changes. Skylord EXP is therefore designed for demanding professional applications.

With an IP69K rating, the warning light provides an exceptionally high level of protection against water and dirt ingress. The lens is manufactured from durable polycarbonate, while the construction combines thermoplastic and polycarbonate to create a rugged yet compact unit.

The operating temperature ranges from -35 °C to +65 °C, making the warning beacon well suited to year-round use even in demanding Nordic conditions.

10-32 V for Both 12 V and 24 V Vehicles

Strands Skylord EXP Warning Light Beacon operates on 10-32 V DC. This makes the warning beacon compatible with both 12 V and 24 V systems and suitable for a wide range of vehicles and machinery.

It is ideal for service vehicles, vans, pickups, trucks, recovery vehicles, construction machinery, agricultural machinery and other work vehicles where clear and reliable LED warning lighting is required.

30 W and 500 mm Connection Cable

The warning beacon has a power consumption of 30 W, and the Surface Mount version is supplied with a 500 mm connection cable. The cable provides positive and negative power connections, while control of the light's functions is handled wirelessly through the SKYN1 EXP system.

Why Choose the Strands Skylord EXP LED Warning Beacon Surface Mount?

• E-approved LED warning light according to R65 Class 2
• 8 different warning patterns
• Separate day and night modes
• Cruise Mode and steady light
• Wireless Bluetooth control through SKYN1 EXP
• Memory function for the most recently used warning mode
• Can be combined with multiple compatible SKYN1 EXP lights
• Surface Mount for permanent surface installation
• Simple installation using only one M8 bolt
• Very low-profile construction of approximately 40.4 mm
• Approximately 135.5 mm wide
• Dark lens for a discreet appearance when switched off
• 30 W power consumption
• 10-32 V DC for both 12 V and 24 V systems
• IP69K for excellent protection against water and dirt
• Durable polycarbonate lens
• 500 mm connection cable
• Operating temperature from -35 °C to +65 °C
• Approved according to R65 Class 2, R10.07 and CE-RED
• SIG Bluetooth
• M8 mounting hardware included
• 3-year warranty from Strands

Modern LED Warning Beacon for Professional Vehicles

Strands Skylord EXP LED Warning Beacon Surface Mount is designed for users who want to combine effective warning lighting with a modern and discreet installation. R65 Class 2 approval, eight warning patterns, day and night modes and low-profile design make the light a flexible solution for many types of professional vehicles and machinery.

Integration with SKYN1 EXP also makes the warning beacon part of an intelligent vehicle lighting system. Through Bluetooth, the warning light can be controlled from the same controller as other compatible driving lights, work lights and vehicle lighting, while reducing the need for conventional control wiring.

For anyone looking for an E-approved LED warning beacon with R65 Class 2, low-profile mounting, 12 V/24 V compatibility and wireless Bluetooth control, Strands Skylord EXP Surface Mount offers a strong combination of functionality, durability, modern technology and straightforward installation.