Skylord Exp 900 mm LED warning light bar

Strands Skylord EXP LED Warning Light Bar 900 mm - R65 Class 2 with 24 Warning Patterns and Bluetooth Control

Strands Skylord EXP LED Warning Light Bar 900 mm is an advanced low-profile LED warning light bar designed for professional vehicles where maximum visibility, modern design and intelligent control are important. With 24 different warning patterns, day and night modes, Cruise Mode and ECE R65 Class 2 approval, it provides a powerful warning light solution for service vehicles, recovery vehicles, vans, trucks, road maintenance vehicles and work machinery.

This 900 mm version is developed for the Strands SKYN1 EXP system and communicates wirelessly via Bluetooth with the SKYN1 EXP controller inside the vehicle. The warning light bar only requires a power connection for normal installation, while warning patterns, day/night mode and other functions are controlled wirelessly from the driver's position.

The result is a modern roof-mounted LED warning light bar that combines strong warning performance with a cleaner installation and more advanced control possibilities than a conventional warning light bar.

R65 Class 2 - E-Approved Professional Warning Lighting

Skylord EXP Warning Light Bar is E-approved according to ECE R65 Class 2. This means the light bar is designed for professional warning lighting and provides separate light output levels adapted to day and night conditions.

During daylight, warning lighting needs to be powerful enough to remain clearly visible even in bright surroundings. At night, a lower light level can be used to maintain a clear warning signal without unnecessarily intense output.

This makes Skylord EXP particularly suitable for vehicles used both day and night where warning lighting must perform effectively under changing light conditions.

24 Different Warning Patterns

Skylord EXP 900 mm offers no fewer than 24 different warning patterns. This provides extensive possibilities for adapting the visual warning signal to the vehicle's application and working environment.

Available functions include:

• Single Flash
• Double Flash
• Quad Flash
• Fast Flash
• Random Flash
• Dynamic Flash
• SOS
• Alternating Single Flash
• Alternating Double Flash
• Alternating Quad Flash
• Alternating Fast Flash
• Synchronous and alternating multi-segment patterns
• Clockwise Sequential
• Counter-clockwise Sequential
• Chase Left to Right
• Chase Right to Left
• Centre-out Sequential
• Edge-to-centre Sequential
• Sequential patterns combined with steady light
• Breath
• Centre-out Sequential with strobe

The wide selection of light patterns allows the same warning light bar to be used on many different types of professional vehicles and adapted to the required warning signal.

48 Possible Modes with Day and Night Function

The 24 warning patterns can be used together with the light bar's separate day and night modes. This provides up to 48 combinations of warning pattern and brightness level.

Using the SKYN1 EXP controller, you can quickly switch between day and night modes without making any physical adjustments to the light bar itself.

This is particularly useful on service and work vehicles operating for long periods where lighting conditions change throughout the day.

Cruise Mode and Steady Light

In addition to the different flash patterns, Skylord EXP also features Cruise Mode and a steady-light function. This provides additional flexibility for different applications.

Steady light is activated directly through the SKYN1 EXP controller and provides an alternative to flashing warning patterns where the application allows or requires it.

Always check which warning functions are permitted for the specific application and vehicle category in which the product is used.

SKYN1 EXP - Wireless Bluetooth Control

What truly separates Skylord EXP from a conventional warning light bar is its integration with Strands SKYN1 EXP. The bar features built-in Bluetooth communication and pairs wirelessly with the SKYN1 EXP controller inside the vehicle.

Once connected to power and paired, the system automatically recognises the bar as a warning light and assigns it to the warning light button on the SKYN1 EXP controller without complicated manual programming.

The key functions of the light bar can then be controlled directly from the driver's position.

The SKYN1 EXP Wireless Controller, part number 907851S1, is required for the light bar to operate and is sold separately. The light bar cannot be activated until it has been paired with the controller.

Easy Control Directly from the Driver's Position

The different functions are controlled with simple button commands on the SKYN1 EXP controller:

• Single press - switches the warning light bar on or off
• Double press - changes between warning patterns
• Triple press - activates steady light
• Hold for 3-5 seconds - switches between day and night modes
• Hold for more than 5 seconds - resets the light bar to the first warning pattern and day mode

This means advanced functions can be controlled from a compact physical controller without requiring the driver to navigate an app during operation.

Memory Function for the Last Used Warning Mode

The SKYN1 EXP system features a memory function that automatically remembers the most recently used warning mode.

This is practical on professional vehicles where the same pattern is used regularly. There is no need to cycle through all warning patterns from the beginning each time the light bar is used.

Amber LED Warning Light with High Visibility

Skylord EXP uses powerful amber LEDs to create a clear warning signal around the vehicle. The long format and multiple light segments provide a significantly larger illuminated area than a single directional warning light.

This makes a roof-mounted warning light bar particularly useful on vehicles where visibility from several directions is important, including road work, recovery operations, service work, loading, road maintenance and construction.

900 mm - Excellent Balance Between Visibility and Compact Size

This version of Skylord EXP has a length of 900 mm. It provides a large and clearly visible warning area while remaining compact enough for many vans, pickups and service vehicles.

Approximate dimensions:

• Length: 900 mm
• Depth: 150 mm
• Light bar height: approximately 34.2 mm
• Height including mounting brackets: approximately 71.8 mm

This makes Skylord EXP an extremely low-profile warning light bar compared with many conventional roof bars.

Low-Profile Design Reduces Overall Installation Height

With a light bar body measuring only approximately 34.2 mm high, Skylord EXP creates a slim and modern appearance on the vehicle.

The low profile is particularly attractive on modern vans, pickups and service vehicles where a large and bulky warning light bar on the roof is undesirable.

Even including the mounting brackets, total height is only approximately 71.8 mm, helping keep overall installation height to a minimum.

Dark Lens for a Discreet Appearance When Switched Off

Skylord EXP is equipped with a dark polycarbonate lens. When the bar is switched off, the dark lens gives it a discreet and modern appearance that integrates well with many vehicle designs.

When activated, the powerful amber LED segments become clearly visible and create the strong warning signal expected from a professional warning light bar.

155 W for Powerful Warning Lighting

The 900 mm version has a power consumption of 155 W. The light bar should therefore be connected to a correctly sized power supply in accordance with the installation instructions.

The high power output is combined with a large number of LED segments to create a clear and effective warning signal across the full 900 mm width of the bar.

10-32 V for Both 12 V and 24 V Vehicles

Skylord EXP operates on 10-32 V DC and is therefore compatible with both 12 V and 24 V systems.

This makes the warning light bar suitable for a wide range of professional vehicles, including:

• Service vehicles
• Vans
• Pickups
• Recovery vehicles
• Roadside assistance vehicles
• Trucks
• Road maintenance vehicles
• Construction machinery
• Agricultural machinery
• Other work vehicles

2.5 Metre Cable for Flexible Installation

Skylord EXP Warning Light Bar is supplied with a 2500 mm connection cable. The cable has separate positive and negative conductors, and a fuse is included.

Because warning functions are controlled wirelessly through SKYN1 EXP, there is no need to route a conventional control cable from the light bar all the way to a separate control panel in the cabin.

This can significantly simplify installation compared with traditional warning light bars where multiple functions require several separate control wires.

Less Control Wiring Through the Vehicle

On modern vehicles, routing cables through the roof, A-pillars, firewall and dashboard is often one of the most time-consuming parts of a lighting installation.

With SKYN1 EXP, communication between the light bar and the driver controller takes place via Bluetooth. The bar requires power, but commands for on/off, warning pattern and day/night mode are transmitted wirelessly.

This provides a cleaner installation and reduces the need for separate signal wiring throughout the vehicle.

Can Be Combined with Other Skylord EXP Products

Skylord EXP Warning Light Bar is part of the wider SKYN1 EXP ecosystem. The same controller can be used together with other compatible Skylord EXP products.

The system automatically identifies different types of lighting and assigns them to their respective functions:

• Driving lights and LED light bars
• Position lights
• Work lights
• Warning lights

This means you can combine a Skylord EXP warning light bar on the roof with Skylord EXP work lights and driving lights and control all functions from the same system.

Two Lighting Groups Provide Greater Flexibility

The SKYN1 EXP controller features two separate groups. Compatible lights can therefore be divided according to location or application.

On a larger service vehicle, different warning lights or other EXP lights can, for example, be placed in different groups depending on how the installation is intended to be used.

This provides greater flexibility when creating a complete lighting system around the vehicle.

IP67 - Developed for External Vehicle Installation

A roof-mounted warning light bar is continuously exposed to rain, snow, dust, dirt and changing weather conditions. Skylord EXP is therefore rated to IP67.

This provides a high level of protection against dust and water and makes the light bar suitable for permanent external installation on professional vehicles.

Electrical connections should always be completed using a suitable waterproof solution in accordance with the installation instructions.

Aluminium Base and Durable Polycarbonate Lens

Skylord EXP combines an aluminium base with an upper plastic construction and a durable polycarbonate lens.

The aluminium base provides a stable structure, while the polycarbonate lens is well suited to the exposed position on the vehicle roof.

Designed for -35 °C to +65 °C

Skylord EXP is designed for an operating temperature range from -35 °C to +65 °C.

This makes the light bar well suited for professional vehicles used throughout the year, from cold Nordic winters to hot summer days.

R10.07 and Wireless Approvals

In addition to ECE R65 Class 2, Skylord EXP is approved according to ECE R10.07 for electromagnetic compatibility.

The integrated Bluetooth communication is also covered by CE-RED and Bluetooth SIG.

This is particularly relevant on modern vehicles where warning lighting needs to operate alongside a large number of other electronic systems.

Mounting Brackets and Fuse Included

Skylord EXP 900 mm is supplied with mounting hardware for the light bar. The package includes:

• 2 mounting brackets
• M8 screws, spacers, spring washers and nuts
• M6 screws, spring washers and nuts
• EVA protective pads
• Fuse

This provides a complete foundation for installing the light bar in a suitable position on the vehicle. Exact positioning and mounting must always be adapted to the vehicle and applicable regulations.

Service-Friendly Modular Design

Skylord EXP is designed so that an individual light module can be replaced through the upper section of the bar if necessary. This can make future servicing easier compared with designs where the entire warning light bar must be replaced in the event of a single module failure.

Servicing and disassembly should always be carried out according to Strands' instructions to avoid damaging seals or other protective components.

The Controller Is Required - Test Before Final Installation

Because Skylord EXP is specifically developed for the SKYN1 EXP system, the controller is an essential part of the product. The light bar functions remain locked until it has been paired with the SKYN1 EXP Wireless Controller 907851S1.

Strands therefore recommends connecting, pairing and function-testing the light bar before it is permanently mounted on the vehicle.

This allows Bluetooth communication, power supply and warning functions to be verified before the installation is completed.

Why Choose the Strands Skylord EXP LED Warning Light Bar 900 mm?

• Professional 900 mm LED warning light bar
• E-approved according to ECE R65 Class 2
• 24 different warning patterns
• Up to 48 combinations with day and night modes
• Separate day and night modes
• Cruise Mode
• Steady light can be activated from the controller
• Amber LED warning light
• Wireless Bluetooth control through SKYN1 EXP
• Automatic identification as a warning light in the SKYN1 EXP system
• Memory function for the most recently used warning mode
• Can be combined with other compatible Skylord EXP lights
• 10-32 V DC for both 12 V and 24 V vehicles
• 155 W power consumption
• IP67 for external vehicle installation
• Dark polycarbonate lens
• Robust aluminium base
• 900 mm wide
• Approximately 150 mm deep
• Light bar body only approximately 34.2 mm high
• Approximately 71.8 mm total height including mounting brackets
• 2500 mm connection cable
• Fuse included
• Mounting brackets and mounting hardware included
• Operating temperature from -35 °C to +65 °C
• Approved according to R65 Class 2, R10.07 and CE-RED
• Bluetooth SIG
• 3-year warranty from Strands

Modern LED Warning Light Bar for Service Vehicles, Trucks and Work Vehicles

Strands Skylord EXP LED Warning Light Bar 900 mm is developed for professional users who demand more from warning lighting than a simple flashing roof bar. With 24 warning patterns, separate day and night modes, Cruise Mode and R65 Class 2 approval, it provides an advanced warning light bar that can be adapted to many different working environments.

The low-profile construction of only approximately 34 mm also gives the vehicle a modern and discreet appearance. With a width of 900 mm, the bar provides a clearly visible presence and large illuminated area without being unnecessarily large for many vans, pickups and service vehicles.

Integration with SKYN1 EXP makes the installation even more sophisticated. Bluetooth control reduces the need for separate control wiring, while the same controller can manage other compatible driving lights, work lights and warning lights within the Skylord EXP range.

For anyone looking for an E-approved 900 mm LED warning light bar with R65 Class 2, 24 warning patterns, 12 V/24 V compatibility and wireless Bluetooth control, the Strands Skylord EXP 900 mm is a modern and highly complete solution for professional vehicle lighting.