Skylord Exp 2000 mm LED warning light bar

Strands Skylord EXP LED Warning Light Bar 2000 mm - R65 Class 2 with 24 Warning Patterns and Bluetooth Control

Strands Skylord EXP LED Warning Light Bar 2000 mm is the largest warning light bar in the Skylord EXP range and is developed for large professional vehicles where maximum visibility, a large warning surface and advanced control are important. With 24 different warning patterns, separate day and night modes, Cruise Mode and ECE R65 Class 2 approval, it provides a powerful LED warning light solution for trucks, recovery vehicles, large service vehicles, road maintenance vehicles and specialist work vehicles.

The model is referred to as the 2000 mm version and has an actual specified length of approximately 1950 mm. This makes it particularly suitable for wide vehicles where a large roof-mounted warning light bar provides both better proportions and an extensive visual warning area.

Skylord EXP is also much more than a conventional warning light bar. It is developed for the Strands SKYN1 EXP system and communicates wirelessly via Bluetooth with the SKYN1 EXP Wireless Controller inside the vehicle. On/off control, warning patterns, steady light and day/night mode can therefore be controlled directly from the driver's position without conventional separate control wiring between the light bar and the control panel.

Part number: 905515S1.

E-Approved According to ECE R65 Class 2

Skylord EXP Warning Light Bar 2000 mm is E-approved according to ECE R65 Class 2 and developed for professional warning lighting.

R65 Class 2 means the warning light can be operated at different output levels for day and night conditions. In bright daylight, high light intensity is required so the warning signal remains clearly visible even in bright surroundings, while a lower level can be used in darkness.

The result is a warning light bar that provides clear visibility both day and night and is well suited to vehicles used during long working shifts and under changing lighting conditions.

24 Different Warning Patterns

Skylord EXP offers no fewer than 24 different warning patterns. This provides extensive possibilities for adapting the visual warning signal to the working environment, vehicle and application.

Available patterns include:

• Single Flash
• Double Flash
• Quad Flash
• Steady
• Fast Flash
• Random Flash
• Dynamic Flash
• SOS
• Alternating Single Flash
• Alternating Double Flash
• Alternating Quad Flash
• Alternating Fast Flash
• Multi-segment Sync & Async Flashing 1
• Multi-segment Sync & Async Flashing 2
• Clockwise Sequential
• Counter-clockwise Sequential
• Chase Left to Right
• Chase Right to Left
• Centre-out Sequential
• Edge-to-centre Sequential
• Clockwise Sequential + Steady
• Counter-clockwise Sequential + Steady
• Breath
• Centre-out Sequential + Strobe

The large number of patterns makes the light bar suitable for many different professional applications, from recovery and roadside assistance to road maintenance, construction, service and transport.

48 Possible Modes with Day and Night Function

The 24 warning patterns can be combined with separate day and night modes. This provides up to 48 different warning modes.

The driver can switch between day and night directly from the SKYN1 EXP controller, eliminating the need for any separate physical adjustment on the light bar itself.

This function is particularly valuable for professional vehicles operating both in daylight and darkness where warning lighting needs to be adapted to the surroundings.

Cruise Mode and Steady Light

In addition to the different flashing patterns, Skylord EXP also features Cruise Mode and a steady-light function.

Steady light can be activated from the SKYN1 EXP controller, providing additional flexibility for different tasks and situations.

The warning functions permitted on public roads can vary depending on country, vehicle category and application. Always check the regulations that apply to the specific installation.

SKYN1 EXP - Wireless Bluetooth Control

One of the most important Skylord EXP features is its integrated SKYN1 EXP Bluetooth communication. The light bar communicates wirelessly with the SKYN1 EXP Wireless Controller inside the vehicle.

Once connected to power and paired, the system automatically identifies the product as a warning light and assigns it to the correct function on the controller.

This makes installation and operation easier because the controller automatically recognises which type of EXP product has been connected.

The SKYN1 EXP Wireless Controller, part number 907851S1, is required for the light bar to operate and is sold separately. The light functions cannot be activated or function-tested until the bar has been paired with the controller.

Control the Light Bar Directly from the Driver's Position

Once paired, the key functions can be controlled with simple button commands on the SKYN1 EXP controller:

• Single press - switches the warning light bar on or off
• Double press - changes to the next warning pattern
• Triple press - activates steady light
• Hold for 3-5 seconds - switches between day and night modes
• Hold for more than 5 seconds - resets the light bar to the first warning pattern and day mode

This provides quick access to the light bar functions through a physical controller and means the driver does not need to use a mobile phone or other programming device during work.

Memory Function for the Last Used Warning Mode

SKYN1 EXP features an integrated memory function that automatically remembers the last used warning mode.

On a work vehicle where the same warning pattern is used regularly, this means the user does not need to cycle through every pattern each time the light bar is activated.

No Separate Synchronisation Function Required

The Skylord EXP warning light bar uses its own integrated multi-segment patterns to create sequential, alternating and dynamic lighting effects across the full width of the bar.

According to Strands, the warning light function therefore does not use a separate synchronisation function through the SKYN1 EXP controller. The different patterns and sequences are instead selected directly from the light bar's 24 programmed warning patterns.

2000 mm Model for the Largest Vehicles

This is the largest version in the Skylord EXP range. It is marketed as 2000 mm and has an actual specified length of approximately 1950 mm.

This makes the model particularly suitable for:

• Trucks
• Recovery vehicles
• Large service vehicles
• Roadside assistance vehicles
• Road maintenance vehicles
• Larger transport vehicles
• Construction vehicles
• Special-purpose work vehicles

On a large vehicle, the wide construction provides a more proportionate installation while distributing the amber LED segments across a large part of the roof width.

Large Warning Surface for High Visibility

On professional work vehicles, the effectiveness of a warning light bar is not only about maximum light intensity. A major part of the warning effect comes from how clearly the signal can be recognised from different directions.

The wide construction and numerous amber LED segments allow Skylord EXP to create a large visual warning area on the vehicle.

This is particularly useful for:

• Work on or beside roads
• Recovery and roadside assistance
• Road maintenance
• Service work
• Loading and unloading
• Construction work
• Work involving heavy vehicles and machinery

Extremely Low Profile Despite Its Large Width

Despite being the largest Skylord EXP light bar, it has a very low-profile construction. The light bar body is only approximately 34.2 mm high.

The low profile provides a significantly more modern and integrated appearance than conventional tall warning light bars. This is particularly attractive on modern trucks and larger work vehicles where effective warning lighting needs to be combined with a carefully designed installation.

The specified construction is approximately 150 mm deep, while total height including the mounting bracket is approximately 71.8 mm.

Dark Lens Provides a Modern and Discreet Design

Skylord EXP is equipped with a dark polycarbonate lens. When the light bar is switched off, it has a discreet and modern appearance that suits today's work vehicles.

When the warning function is activated, the amber LED segments become clearly visible through the dark lens.

The combination of dark lens, low profile and aluminium construction allows the large light bar to retain a clean and modern overall appearance.

280 W Power Consumption

Skylord EXP 2000 mm has an actual power consumption of 280 W.

The higher consumption compared with the shorter models is due to the extra-wide light bar containing more LED segments and creating a larger warning surface.

Power supply, cable sizing and fusing should always be dimensioned according to the load and Strands' installation instructions.

10-32 V - for Both 12 V and 24 V Vehicles

Skylord EXP operates on 10-32 V DC and can therefore be used with both 12 V and 24 V systems.

The wide voltage range is particularly important for this size because the 2000 mm version is primarily developed for professional vehicles where 24 V systems are common, while it can also be used in compatible 12 V installations.

2.5 Metre Connection Cable and Fuse Included

The light bar power supply is connected through a 2500 mm cable with separate positive and negative conductors. A fuse is included.

The generous cable length provides flexibility when installing the light bar on large vehicles and makes it easier to find a suitable cable route from the roof to the vehicle power supply.

Bluetooth Reduces the Need for Control Wiring Through the Vehicle

A conventional multifunction warning light bar may require several different signal wires from the roof down to a control panel inside the cabin. On large vehicles, such wiring can be both time-consuming and complicated.

With Skylord EXP, control commands are instead transmitted through Bluetooth. The light bar still requires a correctly sized power supply, but functions such as:

• On and off
• Warning pattern selection
• Steady light
• Day and night modes

are controlled wirelessly from the SKYN1 EXP controller.

This reduces the need for signal wiring through the roof, pillars and cabin and can make the installation significantly cleaner.

Part of the Complete SKYN1 EXP Ecosystem

Skylord EXP Warning Light Bar can be combined with other compatible products within the SKYN1 EXP system.

The controller automatically recognises different types of compatible lighting:

• Driving lights and LED light bars
• Position lights
• Work lights
• Warning lights

This makes it possible to combine a Skylord EXP warning light bar on the roof with Skylord EXP work lights around the vehicle and Skylord EXP driving lights at the front and bring all control functions together within the same system.

Two Groups Provide Flexibility on Large Vehicles

SKYN1 EXP Wireless Controller features two separate groups. Compatible EXP products can therefore be divided according to factors such as location or application.

On a larger truck, recovery vehicle or service vehicle, this can be used to organise different groups of lighting around the vehicle.

Each group has separate functions for driving lights/LED light bars, position lights, work lights and warning lights.

Support for Up to 32 Compatible EXP Lights

One SKYN1 EXP system can manage up to 32 compatible lights across the controller's two groups.

This makes the system particularly interesting for large and specialist work vehicles where the warning light bar is only one part of a much larger lighting system.

IP67 for Permanent External Installation

A warning light bar with an actual length of almost two metres mounted on a vehicle roof will continuously be exposed to rain, snow, dust and dirt. Skylord EXP therefore carries an IP67 rating.

This provides a high level of protection against both dust and water and makes the light bar suitable for permanent external vehicle installation.

Electrical connections and cable entries should still be completed using suitable waterproof solutions according to Strands' installation instructions.

Rugged Aluminium and Polycarbonate Construction

Skylord EXP combines a stable aluminium base with an upper plastic construction and a durable polycarbonate lens.

The aluminium base is particularly important on such a wide warning light bar because it provides a stable foundation for the long construction.

The polycarbonate lens is also well suited to a product that will remain permanently outdoors on professional vehicles and be exposed to weather and vibration.

Designed for -35 °C to +65 °C

Skylord EXP is developed for an operating temperature range from -35 °C to +65 °C.

This makes the light bar well suited to year-round professional vehicle use, from cold Nordic winter conditions to hot summer days.

R10.07, CE-RED and Bluetooth SIG

In addition to ECE R65 Class 2, Skylord EXP is approved according to ECE R10.07 for electromagnetic compatibility.

The integrated Bluetooth communication is also covered by CE-RED and Bluetooth SIG.

This is relevant on modern vehicles where warning lighting and other aftermarket electronic products need to operate alongside the vehicle's existing electrical system and electronics.

Mounting Brackets, Installation Hardware and Fuse Included

Skylord EXP is supplied with mounting components for the basic installation. The package includes:

• Mounting brackets
• M8 screws and spacers
• M8 spring washers and nuts
• M6 screws
• M6 spring washers and nuts
• EVA protective pads
• Fuse

The exact mounting solution should always be adapted to the vehicle construction and the regulations governing the positioning and use of warning lighting.

Service-Friendly Construction with Replaceable Light Modules

Skylord EXP is designed with a modular and service-friendly construction. If an individual light module needs to be replaced, the upper section of the bar can be opened and the relevant module replaced without automatically having to replace the complete light bar.

On professional vehicles where equipment may be used for many hours every day, this is an important advantage because easier servicing can help reduce both downtime and future costs.

Servicing should always be carried out according to Strands' instructions to avoid damaging seals and other protective components.

SKYN1 EXP Controller Is Mandatory - Test Before Installation

It is important to understand that Skylord EXP does not operate like a conventional warning light bar that can be function-tested simply by connecting positive and negative power.

All lighting functions remain locked until the bar has been paired with the SKYN1 EXP Wireless Controller 907851S1.

Strands therefore recommends connecting the bar to power, pairing it and function-testing it together with the controller before permanently mounting it on the vehicle.

This allows the power supply, Bluetooth communication and all light bar functions to be verified before final installation.

Why Choose the Strands Skylord EXP LED Warning Light Bar 2000 mm?

• Largest LED warning light bar in the Skylord EXP range
• 2000 mm model with an actual length of approximately 1950 mm
• Part number 905515S1
• E-approved according to ECE R65 Class 2
• 24 different warning patterns
• Up to 48 day/night modes
• Separate day and night modes
• Cruise Mode
• Steady light can be activated from the controller
• Amber LED warning light
• Wireless Bluetooth control through SKYN1 EXP
• Automatic identification as a warning light
• Memory function for the last used mode
• Can be combined with other compatible Skylord EXP products
• The SKYN1 EXP system supports up to 32 compatible lights
• Two separate lighting groups
• Approximately 150 mm deep
• Light bar body only approximately 34.2 mm high
• Approximately 71.8 mm total height including mounting brackets
• 280 W power consumption
• 10-32 V DC for both 12 V and 24 V vehicles
• IP67 for permanent external installation
• Dark polycarbonate lens
• Rugged aluminium base
• 2500 mm connection cable
• Fuse included
• Mounting brackets and installation hardware included
• Service-friendly construction with replaceable light modules
• Operating temperature from -35 °C to +65 °C
• Approved according to R65 Class 2, R10.07 and CE-RED
• Bluetooth SIG
• 3-year warranty from Strands

Extra-Wide LED Warning Light Bar for Trucks and Large Work Vehicles

Strands Skylord EXP LED Warning Light Bar 2000 mm is developed for professional users who need the largest and widest warning light bar in the Skylord EXP range. With an actual length of approximately 1950 mm, it creates an extensive warning surface particularly well suited to trucks, large service vehicles, recovery vehicles, road maintenance vehicles and other wide work vehicles.

With 24 warning patterns, up to 48 day/night modes, Cruise Mode and ECE R65 Class 2, the warning signal can be adapted to many different working environments. At the same time, the light bar body measuring only approximately 34 mm high keeps the installation low-profile and modern despite its substantial width.

Integration with SKYN1 EXP also provides significantly smarter control than a conventional warning light bar. Bluetooth communication reduces the need for separate control wiring through the vehicle, while the same controller can be used with compatible Skylord EXP driving lights, work lights and other warning lights.

For anyone looking for an E-approved LED warning light bar in the 2000 mm class with R65 Class 2, 24 warning patterns, 12 V/24 V compatibility and wireless Bluetooth control, the Strands Skylord EXP 2000 mm offers a highly complete combination of maximum visibility, advanced functionality, intelligent installation and professional design.